Knowledge Base
/

Topic

H2O 2-Wire: Troubleshooting.

  1. Resolving a 2-Wire Over Current Summary An overcurrent message occurs when the current drawn by the 2-wire exceeds the 1.5 amp threshold set by H2O 2-Wire: Troubleshooting
  2. Resolving a Single 2-Wire No Connect Summary In the event of an isolated No Connect (2-wire decoder communication failure), where a single device alert is present H2O 2-Wire: Troubleshooting
  3. Resolving Many 2-Wire No Connects Summary In the event of multiple No Connects (2-wire decoder communication failure), where a multitude of device message are present H2O 2-Wire: Troubleshooting
  4. Troubleshooting 2-Wire Required Tools: * Milliamp Clamp Meter. HydroPoint recommends the Armada Pro 93 RMS AC Leakage Clamp   * A site map that shows H2O 2-Wire: Troubleshooting
  5. Troubleshooting Two-Wire If your 2-wire  displays an Over-Current message, all watering stops and you cannot use the controller until you resolve the H2O 2-Wire: Troubleshooting
  6. Two-wire Device mA Draw Reference and Calculator The table below outlines the milliamp draw for each WeatherTRAK two-wire device type. Input the device quantities on your two-wire H2O 2-Wire: Troubleshooting
← All WeatherTRAK topics