Knowledge Base
/

Topic

Programming Decoders.

  1. Programming a Flow Sensor H2O 2-Wire Decoder These instructions are for H2O 2-Wire controllers running firmware version 8.9 (released August 2021) and higher. To find your Programming Decoders
  2. Programming a Master Valve H2O 2-Wire Decoder These instructions are for H2O 2-Wire controllers running firmware version 8.9 (released August 2021) and higher.  To find your Programming Decoders
  3. Programming a Pump Start H2O 2-Wire Decoder These instructions are for H2O 2-Wire controllers running firmware version 8.9 (released August 2021) and higher. To find your Programming Decoders
  4. Programming a Single Valve H2O 2-Wire Decoder These instructions are for H2O 2-Wire controllers running firmware version 8.9 (released August 2021) and higher. To find your Programming Decoders
  5. Programming a Tucor Decoder (PBT) Step-by-Step Guide Identifying the Correct Decoder Type Before programming, verify that you have the correct decoder for your system. The Programming Decoders
  6. Programming a Two Valve Decoder Programming a two valve decoder must be done BEFORE installation on the 2-wire path. 1. Plug the decoder into the Programming Decoders
  7. Programming a Two Valve H2O 2-Wire Decoder These instructions are for H2O 2-Wire controllers running firmware version 8.9 (released August 2021) and higher.  To find your Programming Decoders
← All WeatherTRAK topics