Knowledge Base
/

Topic

Programming.

  1. Assigning Stations to a Pipe OptiFlow users can now assign individual stations to any pipe (whether it's a mainline or flow zones) to Programming
  2. Getting Started Part 1 - OptiFlow Getting Started Part 1 Follow the 4 Steps below: STEP 1WeatherTRAK New User Introduction Training Taking [insert-question 1594037] Programming
  3. Manual Operation at the Controller Panel Manual operation can be initiated from the OptiFlow controller panel. You will need to unlock the controller, placing it into Programming
  4. Multi-Manual System Operation FAQ for OptiFlow Controllers OptiFlow’s Multi Manual feature is designed to give you the ability to manually water up to 9 stations at Programming
  5. Programming in Auto Mode Programming in Auto Mode Stations can be assigned to one of four different Station Modes. AutoUser no ETUs... [insert-question 972748] Programming
  6. Programming your OptiFlow XR Important note If your controller is in view only mode, it has already been optimized and must be programmed using Programming
  7. Setting the Maximum Active Stations Setting the Maximum Active Stations Setting the Maximum Active Stations Setting the Maximum Active Station number ena... [insert-question 964837] Programming
← All WeatherTRAK topics