Knowledge Base
/

General Information and Summary

Updated May 13, 2021 1 min read

Reports begin with general information about the site or device. The information at the top of the report includes:

  • The name and location of the site or device

  • Serial number, MAC address, firmware version (if applicable)

  • Summary Information (if applicable)

Was this article helpful?

Related in Setup & Operations.

  1. Assigning Master Valves 1.  Make sure that the irrigation controller you want to work with is displayed in the BaseManager footer. To select
  2. Overview of Setting Up and Operating Your Controller BaseManager enables you to manage your irrigation controllers remotely over the Internet. With BaseManager, you’ll be able to do
  3. How Do I Activate My Account? When you are ready to activate your BaseManager account, you will need to go online and fill out the App
  4. Testing a Device This article explains how to test devices in BaseManager for BaseStation 3200, 3200S, and 1000 controllers to verify communication, confirm