Knowledge Base
/

Temperature Levels Report

Updated May 14, 2021 1 min read

The information at the top of the report shows:

  • The site and controller that the report was generated for

  • The description of the temperature sensor that the report was generated for

The line graph tracks the temperature over the specified interval. To see the data for a specific point on the line graph, position the cursor (or tap) on that point. The data displays in a pop-up box.

Was this article helpful?

Related in Setup & Operations.

  1. Assigning Master Valves 1.  Make sure that the irrigation controller you want to work with is displayed in the BaseManager footer. To select
  2. Overview of Setting Up and Operating Your Controller BaseManager enables you to manage your irrigation controllers remotely over the Internet. With BaseManager, you’ll be able to do
  3. How Do I Activate My Account? When you are ready to activate your BaseManager account, you will need to go online and fill out the App
  4. Testing a Device This article explains how to test devices in BaseManager for BaseStation 3200, 3200S, and 1000 controllers to verify communication, confirm