The table below outlines the milliamp draw for each WeatherTRAK two-wire device type. Input the device quantities on your two-wire path to determine correct milliamp draw. Compare the milliamp draw estimate with the actual milliamp draw displayed at your controller. Milliamp draw below what's estimated can indicate disconnected devices or corrosion on your two-wire path. Milliamp draw above what's estimated can indicate a ground fault or shorted device on your two-wire path.
Click here for a downloadable Excel version of the calculator.
Device mA Draw Calculator
Device mA Draw
*Measured with the Armada Pro 95i
| Two-wire device | mA Draw (Controller Two-wire Terminals) | Qty | Subtotal mA |
|---|---|---|---|
| Total Estimated mA Draw | 0.00 mA | ||
Device Qty SubtotalTotal Estimated mA Draw 0.00 mA↺ Reset Quantities
All values are approximate and may vary with installation conditions.
If you're having trouble with your WeatherTRAK controller, consider contacting Hydropoint Support. Hydropoint Support can be reached at support@baselinesystems.com, support@hydropoint.com or 866-294-5847.