Knowledge Base

Assigning a Station to a Pump Start

Lance Elliott Updated April 7, 2026 1 min read

Assigning a station to a pump start is done in the FLOW menu.

1.  Press the FLOW button.

2.  Press the à button until the SELECT FLOW OPTION screen displays.

3.  Press the à button to advance to Flow 02-01 screen.

4.  Press the à button until PS1 (Pump Start 1) is underlined.

5.  Press the + or – button to assign a station number to the pump start.

Was this article helpful?

Related in Irrigation/Flow Settings.

  1. Using the MAD Limit Switch for Sports Turf Update Table of Contents Setting the MAD Limit Switch from WeatherTRAK.netSetting the MAD Limit Switch from the ET Pro3/
  2. Using Manual Irrigation When manually irrigating stations, you can choose to irrigate a single station, multiple stations, or stations that are part of
  3. Water Adjustments The WeatherTRAK controller features an ADJUST menu that allows for adjustments in watering. Two types of adjustments can be made:
  4. Resetting High Depletion Values Update Table of Contents To reset high depletion values from the ET Pro3/LC+ ControllerTo reset high depletion values from