Knowledge Base

+ How to Run a Manual Valve Test

Lance Elliott Updated July 23, 2021 1 min read

Valve tests can be run automatically or manually. A manual valve test is done through the manual test menu. 

1.  Press the MANUAL TEST button.

2.  Press the + or – button until the MANUAL WATER; Valve Test screen displays.

3.  Press the à button until the RUN VALVE TEST screen displays.

4.  Press the * button to run the test. If a fault is found, the screen will display the total number of stations with faults.

Was this article helpful?

Related in Irrigation/Flow Settings.

  1. Using the MAD Limit Switch for Sports Turf Update Table of Contents Setting the MAD Limit Switch from WeatherTRAK.netSetting the MAD Limit Switch from the ET Pro3/
  2. Using Manual Irrigation When manually irrigating stations, you can choose to irrigate a single station, multiple stations, or stations that are part of
  3. Assigning a Station to a Pump Start Assigning a station to a pump start is done in the FLOW menu. 1.  Press the FLOW button. 2.  Press
  4. Water Adjustments The WeatherTRAK controller features an ADJUST menu that allows for adjustments in watering. Two types of adjustments can be made: