Knowledge Base
/

Working with Hydraulic Settings

Updated May 20, 2021 1 min read

In PipeView, you have the ability to view and edit the settings for the hydraulic components in your system.

Examples of some of the tasks you can perform:

  • Add or update descriptions of the components
  • Enable or disable a component
  • Set or change limits and/or values for devices
  • Enable or disable variances

Any changes that you make in PipeView are automatically copied to the associated BaseStation 3200 irrigation controller(s), to BaseManager (if subscribed), and to the FlowStation (if applicable).

Was this article helpful?

Related in Hydraulic Settings.

  1. Updating a Zone Description 1.  In PipeView position the hydraulic system diagram so you can see the zone (valve) that you want to work
  2. Updating a Mainline Description 1.  In PipeView position the hydraulic system diagram so you can see the mainline that you want to work with
  3. Updating Details for Control Point Devices You can update the details for the flow meter, master valve, and/or pressure sensor that are assigned to a
  4. Setting the Monthly Water Budget 1.  In PipeView position the hydraulic system diagram so you can see the water source that you want to work