NOTE: The Flash/RAM % is displayed in > Advanced > system settings page. These readings could help indicate the possible issue.
Some details can be found in https://hydropoint.atlassian.net/browse/ZZ-2380
Steps
This issue should only affect devices with WinCE6 OS. It does not appear to be a problem with WinCE5 (older 3200s with the iMX31 SOM). This issue is currently not reproducible.
- Power cycle the device
- Leave the controller as it is. After approximately 6+ hours it should clear itself.
- If after 24 hours it does not clear or resolve itself. an RMA would be appropriate if in warranty.