Knowledge Base

Topic

WeatherTRAK.

356 articles

  1. First-time Controller Setup Message When a WeatherTRAK controller is powered up for the first time, synchronization between the controller and the WeatherTRAK servers is WT Central Overview
  2. (TBM) Terminal Board Mismatch Note  This alert is for the ET Pro3 and OptiFlow XR controllers, firmware versions 6.6 or 7.2+ or Alert Types
  3. (NF) No Flow Alert A no flow alert means that the flow has dropped below the No Flow Threshold. Possible Causes: * The solenoid plunger Alert Types
  4. (SH) Valve Short When a short alert occurs, the current draw for a single valve solenoid has exceeded 3.0 amps. When shorts Alert Types
  5. (POC) Point of Connection not Found When a Point of Connection Not Found alert occurs, it means that a program has been assigned to a mainline Alert Types
  6. (MLF) Manager Station Low Flow A Manager Station Low Flow alert occurs when the total combined value of all active stations drops below the Station Alert Types
  7. (LK) Leak A Leak alert occurs when the flow has exceeded the Leak Detect Threshold for the first leak delay period. Possible Alert Types
  8. (MHF) Manager High Flow When a manager high flow alert occurs, flow has exceeded the station high flow threshold. Possible Causes * A broken sprinkler Alert Types
  9. (ALK) Advanced Leak When an advanced leak alert occurs, flow has exceeded both the advanced leak alert threshold and the evaluation time threshold Alert Types
  10. (UKM) Update Key Missing A cloud update key resembles a USB thumb drive and is located on the back of the control panel. The Alert Types
  11. (AB) Adaptor Board Not Found When an Adaptor Board not Found (AB) alert occurs, it means that a 72 or 96 station controller is not Alert Types
  12. (MVF) Master Valve Fault When a master valve fault alert occurs, the master valve is closed, but flow is being detected above the alert Alert Types
  13. (MBlk) Mainline Break Leak When a mainline break leak alert occurs, flow has exceeded the mainline break threshold when irrigation is off. Possible Causes Alert Types
  14. (LF) Station Low Flow When a station low flow alert occurs, the station’s flow rate is below the station low flow threshold. The Alert Types
  15. HydroPoint Privacy Policy HydroPoint Data Systems, Inc. Privacy Policy   HydroPoint Data Systems, Inc., ("Company" "We", or “Our”) respects your Rebates
  16. Multi Carrier Modem Installation Guides -ET PRO 3 Update Table of Contents WeatherTRAK ET Pro3 and OptiFlow XRWeatherTRAK LC+ Ensure good placement of the controller/ antenna. If the Installation
  17. WeatherTRAK and WaterCompass User Roles About this article This guide explains the standard user roles available in WeatherTRAK Central (web and mobile) and WaterCompass.   Overview WT Central Overview
  18. Stations Unequipped (WeatherTRAK) Stations Unequipped "Stations unequipped" is a station mode associated with a stations not found alert. Customers can set Tips & Troubleshooting
  19. Soil & Plant Types Typical Soil Types Identifying and understanding existing site soil is an important factor in meeting plant needs. Soil type is Term Definitions
  20. Troubleshooting No Flow Learn how to troubleshoot a No Flow Alert on your WeatherTRAK Controller using WeatherTRAK Central.    Troubleshooting No Flow When a Irrigation/Flow Settings
  21. How to Activate What's new With the release of the Admin Center and Self-Activation, account admins can now create and activate Smart Controllers
  22. Self-Activation Guide Prerequisites Ensure that you have access to the latest version of the WeatherTRAK Mobile app.  The site must already exist WT Mobile Overview
  23. Activating Your ET PRO 3 How to Activate What's new With the release of the Customer Portal and Self-Activation, account a [insert-question 3703142] New Controller Activation
  24. Activating your LC+ How to Activate What's new With the release of the Customer Portal and Self-Activation, account a [insert-question 3703142] New Controller Activation