A Leak alert occurs when the flow has exceeded the Leak Detect Threshold for the first leak delay period.
Possible Causes
- A quick coupler or hose bib is being used
- A valve is not closing completely and is leaking
- A mainline fitting has a crack and is leaking
- A mainline pipe has developed a slow leak
- A quick coupler is stuck partially open or a hose bib has been left open
- This type of alert is for informational purposes. No action will be taken on the controller.
Possible Fixes:
- Repair any valves, quick couplers, or hose bibs.
- Prevent the unauthorized use of a quick coupler or hose bib.
To Clear a Leak Alert from the Controller:
1. Press ALERTS.
2. Press à. The VIEW FLOW STATUS screen displays.
3. Press * to clear the alert.
To Clear a Leak Alert from WeatherTRAK Central:
1. Hover over the Alerts tab and click on Alert List. A list of all active alerts will display.
2. Place a checkmark next to the alert you would like to clear.
3. Press the Clear Flow and Electrical Alerts button. A pop-up screen displays asking you to verify the change. Click Yes.
