SubStation: How to manually run zones

Use the Manual Start/Stop Zone option when you want to quickly start an individual zone or stop a 
zone that you started with this option. You can set the manual runtime between 1 second and 18 
hours.

Note: You cannot use this option to stop a zone that is running in a program. Use the Start/Stop 
Program option to stop a currently running program. 

1. Press the Manual Run button. The Manual Run menu displays. 
2. The Manual Start/Stop Zone option should be highlighted. If it is not highlighted, press the up
   or down button to highlight it, and then press the OK button. The Manual Start/Stop Zone screen 
   displays. 
3. Press the down button to move to the Runtime field. Notice that the field shows the default 
   runtime of 10 minutes. The hour placeholder is highlighted. 
   1. To move to the minutes placeholder, press the right button.
   2. To move to the seconds placeholder, press the right button again. 
   3. To change the time, press the + or – button.
      1. Note: To rapidly increase or decrease the value, press and hold the + button or the –
         button.
4. If you want to allow more than one zone to run at one time during the manual run, press the 
   down button to highlight Max Concurrent, and then press the + or – button to change the 
   number. 
5. Press the up button to highlight the Select Zone(s) field, and then press the OK button. The list of zones displays. 
6. Press the down button to highlight the zone that you want to start or stop, and then press the OK button. 
   1. Any zone that is started with this option shows the runtime countdown to the right of the 
      zone number. The zones that are not running show Done as their status. If the Max 
      Concurrent field was set to 1 on the previous screen and you start more than one zone on this
      screen, the status of the additional zones is set to Waiting.
      Normal watering resumes 60 seconds after the manual run is complete.

CAUTION! If you press a button on the controller to leave this screen while a manual run is in 
progress, the manual run will stop.