Knowledge Base
/

Flow Set-Up with a Single Water Source

Updated March 21, 2026 1 min read

Learn how to configure flow on the BaseStation 3200 via BaseManager. Steps include devices, water sources, control points, and mainlines. For more complex hydraulics with multiple water sources or multiple mainlines, please watch Flow Set-Up with Multiple Water Sources.


Was this article helpful?

Related in Programming.

  1. Turning Electricity On/Off with a Program Update Table of Contents Required MaterialsOverview of the StepsStep 1 - Installing the Dayton RelayStep 2 - Installing the biCoderStep
  2. Setting Up Water Source Priorities With Baseline’s BaseStation 3200 irrigation controller, you can use water from multiple sources to run your irrigation programs. When
  3. Stopping Irrigation for Rain Events If an irrigation system that you manage is running during a rain storm, your customer might be criticized for wasting
  4. SubStation Quick Start Guides See the attached documents below when referencing the Quick Start Guides for the various models of SubStation depending on the