Knowledge Base
/

SubStation Quick Start Guides

Updated May 11, 2026 1 min read

See the attached documents below when referencing the Quick Start Guides for the various models of SubStation depending on the firmware and model that you have.

Substation V1 Quick Start Guide

Substation V2-3 Quick Start Guide

Substation CP Quick Start Guide

SubStation RV Quick Start Guide

Was this article helpful?

Related in Programming.

  1. Turning Electricity On/Off with a Program Update Table of Contents Required MaterialsOverview of the StepsStep 1 - Installing the Dayton RelayStep 2 - Installing the biCoderStep
  2. Setting Up Water Source Priorities With Baseline’s BaseStation 3200 irrigation controller, you can use water from multiple sources to run your irrigation programs. When
  3. Stopping Irrigation for Rain Events If an irrigation system that you manage is running during a rain storm, your customer might be criticized for wasting
  4. Programming a Zone Event Stop/Pause Note: Compatible with 3200S, firmware versions 19.9 and up.  Accessing Zone Event Dates 1. Turn the 3200S dial to