POC High Flow Detected
Priority: High
Definition: The measure flow exceeded the limit that was set in the Control Point (POC).
Example:
This occurs when the flow sensor has measured flow that exceeds the limit that was set in the Control Point or Point of Connection. This can be from a break on the Mainline or the limit that was set in the POC was too low.
Action Needed: This is an alert and action
Troubleshooting:
- Clear the alert
- Consider using a shutdown feature
- Review the POC flow limits set currently
- Make sure there is no break currently on the Mainline
Video originally published July 2021.
If you have questions, here are 3 ways to get answers:
1. Search within this HydroPoint knowledgebase
2. Visit the HydroPoint support page
3. Call 800-362-8774 or email support@hydropoint.com, hours are Mon-Fri 3:00 AM – 6:00 PM PT and Sat 9:00 AM – 2:00 PM PT.